Canada Markets

India's First Pulse Production Outlook

Cliff Jamieson
By  Cliff Jamieson , Canadian Grains Analyst
Connect with Cliff:
The India Agriculture Ministry's First Advance Estimates for 2021-22 released this week estimates the kharif, or summer pulse production, at 9.45 million metric tons (green bar), slightly below their initial target of 9.82 mmt (yellow bar) and a volume that is slightly below the record kharif production in 2016-17 of 9.58 mmt (blue bars). (DTN graphic by Cliff Jamieson)

India's First Advance Estimates point to an expected record summer, or kharif, crop production of 150.5 million metric tons (mmt) in 2021-22, up 0.6% from 2020-21 and close to 13 mmt higher than the five-year average.

The earliest estimate for the crop shows pulse production estimated at 9.45 mmt, down from the target of 9.82 mmt and above the 8.69 mmt produced in last year's summer crop. This would be the second-largest summer production of pulses since the 9.58 mmt was produced in 2016-17.

The kharif pulse crop is the smallest of the two crops, accounting for 33.8% of total production in 2020-21 and averaging 36.6% over the past five years.

The 9.82 mmt target set by the government is the lowest target released for the summer crop in four years. At the same time, the estimated production has come in well below target in each of the past three years, ranging from 1.26 mmt to 2.38 mmt below the government target, while averaging 1.85 mmt or 18% lower over the past three years.

The most recent report from the India Meteorological Department shows normal precipitation in 21 of 36 subdivisions of the country, or 58.3% of the regions, in the June 1 through Sept. 15 period. Excessive precipitation is seen in eight of 36, or 22.2%, and a further seven of 36 regions, or 19.4%, is classed as deficient. The entire country has received precipitation over this period that is 4% below normal, and this bears watching.

Cliff Jamieson can be reached at cliff.jamieson@dtn.com

Follow him on Twitter @Cliff Jamieson

Comments

To comment, please Log In or Join our Community .