Ask the Mechanic

Safety Tip of the Month - November 2021

(Photo illustration by Barry Falkner)

Be careful when two people are working on a hay cutter, no matter if it is a disc cutter or sickle cutter. The cutting edges on these blades are supersharp, and if someone is working on the cutting area, make sure the other person does not turn any other part of the machine. Turning the driveline to grease a cross or CV (constant velocity) joint is a common practice. Be aware that when turning the driveline, you may also turn the discs or move the sickle.

**

-- Write Steve Thompson at Ask The Mechanic, 2204 Lakeshore Dr., Suite 415, Birmingham, AL 35209, or email mechanic@progressivefarmer.com

[PF_1121]

P[L1] D[0x0] M[300x250] OOP[F] ADUNIT[] T[]
P[B1] D[728x90] M[0x0] OOP[F] ADUNIT[] T[]
DIM[1x3] LBL[magazine-article-red] SEL[] IDX[] TMPL[standalone] T[]

Past Issues

and
P[R3] D[300x250] M[300x250] OOP[F] ADUNIT[] T[]