America's Best Shops 2022 - 2

Missouri Farm Shop Designed for Next Generation, Future Needs

Dan Miller
By  Dan Miller , Progressive Farmer Senior Editor
At 66 by 96 feet with 18-foot sidewalls, Paul Tracy's shop is big enough for three semis. (DTN/Progressive Farmer photo by Jim Patrico)

Editor's Note: Farm shops have evolved to become multifunctional spaces to be used year-round by the entire family. To highlight these spaces, each year, DTN/Progressive Farmer features them as part of the America's Best Shops series. This is the second featured shop of this year's series.

**

Paul Tracy is a planner. When the 41-year-old corn and soybean farmer talks about the future, he envisions the next generations of Tracys inheriting a well-designed farming operation in Worth County, Missouri. He wants those generations to know that he improved the land he bought in 2002, expanded the farm's footprint and made it ready for their stewardship.

Tracy especially wants them to know that the farm shop he started building in 2016 was built to last. "I wanted to do it right the first time so that my grandkids can say, 'Grandpa knew what he was doing; he did it right,'" Tracy said.

The shop that Tracy built is large by northwest Missouri standards. At 66 by 96 feet with 18-foot sidewalls, it can hold three semis simultaneously. It's wide enough that a combine with 35-foot-wide bean head fits comfortably through the door, and it's long enough that a tractor with a 24-row planter in transport mode can slide right in.

Some might think the size is excessive, but Tracy figured when planning the shop that, "Farm equipment is not going to get smaller; it's only going to get bigger."

With the shop itself, Tracy's Morton building has a 30- by 36-foot space for office, kitchen, bathroom, parts room and conference, which all have been roughed in.

THE PLAN

Tracy's shop replaces ... well, nothing, really. When he and his wife, Nicki, bought the 740-acre place fresh out of college, it had a solid farmhouse, a chicken house and not much in the way of outbuildings. There was no shop. For the first few years, Tracy had to do machinery repairs and modifications on nature's timetable -- when it wasn't raining too hard or wasn't so cold even a hardy farmer couldn't long endure it. Tracy started thinking about a new shop even before he signed the papers for the farm. But the most important thing at the time was to get a good start in farming.

P[L1] D[0x0] M[300x250] OOP[F] ADUNIT[] T[]

"My folks always told me: 'You buy a farm based on the dirt, not the house or the outbuildings. They come later,'" Tracy said. Being a practical farmer, a shop would come before a better house.

The first plan was to build a shop behind the existing house. But as Tracy assessed his future needs, he realized there wasn't enough room. So, he looked up the hill a few hundred yards and began to make plans in earnest. He investigated building companies, looked in farm magazines for shop ideas and visited as many farm shops as he could.

He eventually chose Morton Buildings as his builder, in part because of the quality he saw, in part because he liked the paint selection. "I wanted something with a top-of-the-line look," he said. "I am very much an eye-appeal guy."

Visuals got even more important to Tracy when he became a Beck's seed salesman, which meant creating good first impressions when clients come to his farm. Joining Beck's also gave Tracy the income boost he needed to go from planning to construction.

SOLID BEGINNING

He started the project with a formidable base. The building has 36-inch footers that are 4 feet deep. All posts rest on deep concrete. Rather than using wood forms, he opted for foam forms, which give extra insulation, so that cold can't as easily seep through exterior walls. That was key, because Tracy decided early in his planning that his new shop would have an in-floor heating system. Those years working in the cold had made him determined to be comfortable and productive in the winter without spending a fortune for heat.

His propane-fed boiler and tube system achieved that purpose. "We can keep it at 65 degrees Fahrenheit and burn very little propane, (about) 800 to 1,200 gallons for the entire winter," Tracy said.

Having in-floor heat rather than forced air influenced his decision to scale the main door to 40 by 16 feet. "We can open that big door to unload a semi of seed, and within 15 minutes after we close the door, it's back to 65 degrees F. Not like forced air, where you lose all your heat when you open a door. There are no hot spots, no cold spots, just very, very consistent heat," Tracy said

More importantly, the huge garage door, which he calls "the movable wall," allows him to pull in multiple pieces of large equipment without creating a traffic jam or impeding workflow.

LET THE LIGHT SHINE

Adding to the shed's productive ambiance are multiple windows. Tracy chose large, 4-by-4-foot windows with screens for airflow and mullions for appearance.

Both the main door and the 30-by-16-foot east door have a line of windows at eye height giving him a view of the outside. "If you don't have windows, your shop is gloomy," Tracy said.

Besides window light, the shop has 25 LEDs, 4-foot panels mounted to the ceiling. Tracy experimented with and then planned panel placement so that, "There aren't any shadows anywhere."

Still in the plan is a storage loft on the north side of the shop. Tracy considered adding a hoist but has found that a forklift might be a more mobile solution to moving heavy objects. Landscaping also is in his plans -- to build eye appeal for his Beck's customers.

And the house? Tracy has plans for a new house near his shop. That's something else his grandkids will inherit.

Watch a video about the shop at: https://www.dtnpf.com/…,

Dan Miller can be reached at dan.miller@dtn.com

Follow him on Twitter @DMillerPF

**

Is your shop one of the best in the country, or have you recently remodeled? If you have, tell us about it. Send us a brief summary of your shop along with a few photos. If selected, you will receive $500 and your shop will be featured in a future issue of Progressive Farmer magazine and on www.dtpf.com. Email dan.miller@dtn.com or send to: Dan Miller, Senior Editor, DTN/Progressive Farmer, 2204 Lakeshore Dr. Suite 415, Birmingham, AL 35209.

P[L2] D[728x90] M[320x50] OOP[F] ADUNIT[] T[]
P[R1] D[300x250] M[300x250] OOP[F] ADUNIT[] T[]
P[R2] D[300x250] M[320x50] OOP[F] ADUNIT[] T[]
DIM[1x3] LBL[article-box] SEL[] IDX[] TMPL[standalone] T[]
P[R3] D[300x250] M[0x0] OOP[F] ADUNIT[] T[]

Dan Miller